Questions

I see many people coming to my site from Google or other search engines. Theses people are asking questions. Questions like: Why does my ladder bar car turn left when I launch? What is the correct pinion angle for a dragster? How to pre-load a rear suspension? and similar.

I have tried to sit down and answer these questions in a blog post as they come in, but I have found that the articles become almost huge as there are so many variables that need to be addressed.

I have an idea.

I encourage you to ask  your question directly to me. You can email me through the contacts page at the back, and I will reply, most likely with more questions so I can answer your question as it pertains to your needs.

I have many customers who email me with all sorts of questions, they send me photos and specs and I guide them through the process they are trying to accomplish. The cool thing about this sport is it is hands on, most of you guys and girls build the car, and set it up yourself. That is fantastic, and if I can help I am more than happy to.

So, don’t be shy or embarrassed, ask away, and I will respond in a timely manner, (you won’t be waiting a week for a reply). You can ask anything to do with Drag racing, from chassis design and setup, engine building and tuning, gas, alcohol, and nitro, gear ratios, tires, driving techniques, sponsorship, or rules, or any thing else.

Pinion Angle.

Magic is an interesting concept. If we look back through the ages at things which were not understood at the time, they were often referred to as magic. Pinion angle is a term I hear tossed about as some sort of magic incantation quite often. Let’s dispel the myth.

Pinion angle in and of itself does not affect the way a car launches. A change in pinion angle does change the angle of the four link or ladder bar brackets on the rear axle housing. So a change in pinion angle will change the angle of push and pull on your rear suspension components, but, and this is the important part, we do not want to use pinion angle as a rear suspension tuning aid.

What we do want to do with pinion angle is have the drive-line in the right relationship so the universal joints work correctly.

Universal joints; this is really cool. Picture a simple shaft, now add a single universal joint in the middle of it and bend it slightly. You can now rotate one end of the shaft, and the other end of the shaft can also rotate, even though it is, in effect, going around a corner. (that’s not the cool part) If you could rotate the input end of the shaft at a very accurate constant velocity, and if you could accurately measure the velocity of the output shaft as it rotates, you would find that the output shaft does not rotate at a constant velocity. In fact through one revolution it actually speeds up and slows down several times as each cross of the universal joint changes angle, even though it still completes one revolution in the same amount of time as the input shaft.

The amount of this acceleration and deceleration changes with the angle of the universal joint. (you can see where I am going with this already can’t you?) From there it is pretty simple to visualize what we might want from a driveshaft with two universal joints in it, we would want both joints to accelerate and decelerate the same amount, at the same time, if we do not, we end up with vibration. We will not always feel the vibration in a drag car that is accelerating, but it is tearing up universal joints as they fight each other. So, pretty simple, we want both universal joint angles to be the same. Mark Williams has a great drawing here to show what I mean.

Now comes the bit that seems to be magic, we want the universal joints to operate at the same angle. . . when the shaft is turning.

Generally if the car has universal joints, it has suspension, suspension allows movement, which will change the angle of the u-joints, so we need some sort of compromise. Logic says we would want our universal joints to be operating at the same angles when they are under the greatest load. Which in our case is when we launch the car. If you remember back to a previous installment, when we launch the car, the rotation of the pinion gear on the ring gear causes the rear axle housing to rotate around the axles in the opposite direction of the tires. Put simply the front of the axle housing wants to go up, the front where the pinion goes in. . . the pinion that is on the end of the driveshaft. . .  after the universal joint. So we will want to take this movement into account when we are setting our pinion angle.

So now, when you are setting up your pinion angle on the floor of your shop, you want to add a little to the angle to compensate for the rotation of the rear housing when you accelerate, here it comes that number you have heard, two degrees down. Ok, two degrees is not always the “exactly” correct angle, but it is a good starting point. but this does not mean that your pinion is set to two degrees, what you want is two degrees more to compensate for rear axle housing rotation. Let’s refer the the Mark Williams drawing here. If Angle “B” is ten degrees, you would want angle “A”, at the pinion, to be pointed down a little to compensate for torque reaction during launch, (the rotation of the front of the axle housing upward), so angle “A” should be about eight degrees. Of course the number itself is dependent on where you measure the angle, but let’s put it simple, you want the pinion pointed down about two degrees more than the back of the transmission. Of course this is all at ride height with fuel load and driver weight in place.

I think one place where many go wrong with the whole pinion angle deal is they do not correct pinion angle after they adjust the rear suspension. Particularly with ladder bars, if you change the front mount location, you must correct your pinion angle.

Rear Suspension

This whole website is pretty cool. By watching the stats I can see that the most popular tags for searches which end up on my site is rear suspension setup, in particular four link setups.

I will, in the next couple weeks, publish a very in depth post on adjusting your four link correctly. It will be a long post to be sure I cover it properly. But to begin with, let’s cover some basics.

As I am sure you have deduced, I am a drag racer, so this discussion refers to drag racing setups. If you want info for a street setup, or something to go around corners, send me an email and I can help you individually.

Let’s start with some basic high school physics. Newton’s law of motion states that for every action there is an equal and opposite reaction. This applies to almost everything we are doing while trying to accelerate a car down the quarter mile, and is very handy to remember when designing or modifying anything on the car.

Pistons are pushing down on the connecting rods, and the crankshaft, most of us understand that, but what are they pushing against? They push up against the cylinder heads, and, here it comes, they push up the same amount that they are pushing down, Newton got it right. That is an example for you, back to the rear suspension.

Your driveshaft is rotating, clockwise when viewed from the front. This turns the pinion gear in the front of your rear axle, the pinion gear is meshed with the ring gear, turning the rotation ninety degrees to drive the rear wheels. Try to picture the following, it can be tricky, but once you get it you will have a better understanding of what is happening in the rear suspension. As the pinion gear is rotating, meshed with the ring gear, if the slicks are stuck hard to the track, in effect preventing the ring gear from turning, or at least impeding the ring gear from turning, the pinion gear is literally trying to “climb up” the ring gear. Picture the ring gear as stationary, the pinion then climbs up the ring. Back to Newton, even when the tires start to rotate as the car accelerates forward, the pinion gear is still trying to climb up the ring gear, by an equal amount of force. Equal to, and opposite the amount of force trying to drive the car forward, (ok, there are some minute losses, friction and such, but for this discussion we can forget about them). And it is a huge amount of force, (torque). Think about that 750 ft lbs of torque your engine makes, multiplied through the torque converter, before hitting your first gearset which multiplies it even more, it is a huge amount of torque, (I am saving the calculations for another post). Now if the pinion is trying to climb up the ring gear, what is stopping it? The axle housing stops it, and in turn, whatever is holding the axle housing in the car. . . four links, ladder bar, leaf spring, etc.

Now, rather than visualizing the pinion climbing the ring gear, picture the whole axle housing trying to rotate up and around the rear axle, in the opposite direction to tire rotation, (and with an equal amount of force, Newton again). The housing is being driven around the rear axle by the pinion gear. It is this rotational force that we are harnessing with a four link or ladder bar or any other rear suspension setup.

A four link has two bars per side, a top bar and bottom bar. Pictured from the side, and under acceleration, (people often forget that under braking, or deceleration, everything happens the other way, ever see a car try to turn when backing off at the top end?), the bottom bar is being pushed forward, and being compressed by the rotational force of the axle housing, while the top bar is being pulled backwards and upwards in tension, trying to lift the chassis of the car. Adjusting the angle of the bars, controls the direction of the push and the pull, pushing the car forward, pulling up on the chassis, lifting the chassis, in turn transferring weight to the rear tires.

This all refers to the basic load directions in a four link rear suspension, so that you can picture what is happening back there when you release the trans brake, or mash the throttle. I have tried to make it basic enough to follow, yet assume the reader has a bit of an understanding of the terms I am using. These loads are all similar in a ladder bar setup, or leaf springs. Stock coil spring rear end setups, like some Mustangs and Camaros are in one form or another a four link, but with different geometry for anti-squat and anti-dive, as well as general passenger comfort. This is the first time I have ever really written a technical article, and hope I am making the concepts clear and understandable. I will work out how to add drawings in future articles to help clarify some of the concepts. If you have any questions, don’t quite understand what it is I am trying to get across, or want some clarification, please send me an email, I would love to hear. If you have any ideas for future posts, I would love to hear them too.

I will continue this discussion on rear suspensions soon, so check back often.

Ladder bars.

Why not a four link?

I am a big fan of ladder bars. For the majority of racers out there a ladder bar will do everything they require. But a four link is better, I hear this all the time, and yes in some perspectives a four link is a much better drag racing rear suspension setup. The biggest advantage to a four link is it’s adjust-ability.  This can be a great advantage. . .  if you know how to adjust it. When I look around the track, I see very few people adjusting their four links. Generally what I see are four links that have been setup, either by someone who knows how to tune them, or after a certain amount of aggravation, or “that’s how I bought the car, and I am not going to touch it ’cause it is working just fine the way it is”., and because the car is going straight, and running consistent, the owner leaves it alone.

The problem with a four link is that very few people have spent the time to work out how to make adjustments. I am not going to get into how to adjust a four link here, but I will tell you that the procedure starts when the car is being built. The chassis builder should have given you a chart of instant centres. If you don’t have one, you need to get one. You can generate one yourself. There are computer programs you can buy that make it easier, or you can do it the old fashioned way on the floor. I have done both. I now have a computer program I find reasonably easy to use although it does not allow for as many holes as we are using in newer four link setups, so I have to run the program twice. Once you have your instant centre chart, you then need some sort of preload reference. How much weight, does a quarter turn on the bar add, or subtract, form each corner. Of course this will change with a change in instant centre, so if you change bar locations, you then need to know the preload adjustments for that location. The point I am trying to make here is that although a four link is a great rear suspension setup, the adjustment procedure is too involved many drag racers. They generally get it working, then never adjust it.

If that is going to be the case, why not use a ladder bar then? A ladder bar generally has three choices for instant centre, and you can see them all on the car, you don’t need a chart. Preload can be set with a ruler if you want, although I do prefer to weigh the car so I have a reference point for preload adjustments. Often, unless it is a very high horsepower car, little or no preload is required with a ladder bar.

Ladder bars do take up a little more space forward in the chassis, if you are building a car with a lot of rearward driver position it can be a challenge to get a long enough bar in the car.

One of the cars I am currently building is a ladder bar setup. It is a very short wheelbase at 100.5 inches, so getting bars in there can be done. This one is interesting in that the owner wanted to use his rear axle housing which was already setup for a four link. It has a range of holes on the axle housing that could be used, and they are not in the usual location for a ladder bar. I had to get creative. One problem the typical ladder bar has is because of the angle of the two bars, as soon as you adjust the rear of the bar for pinion angle, the hole spacing changes, causing a side load on the rod ends, this is not good at all. It can also cause a certain amount of stress and cursing when trying to install the bars after making an adjustment.

For this car, I wanted to take advantage of the range of holes in the housing. I accomplished this by putting a pivot in the top tube, allowing the hole spacing at the rear to be adjustable. This solves two problems, first there is now no side loading on the rear rod ends after adjustment, and second, because I made the top bar adjustable, pinion angle can be changed very easily. Now that I have built these bars, I wouldn’t build them any other way. They are a little more expensive, but worth it. They offer a large range of adjust-ability, without the confusion of a four link. They are very strong, with large diameter thick wall 4130 tubing. And they can be built to suit any set of brackets you may already have.

Questions? Ask away, at the contacts page

Since I published this post a few days ago, it is interesting to note that people are finding it when searching “how to adjust four links”. I will compose an in depth look at how to adjust a four link suspension for future post. It may take a while so check back often. If you have any specific questions concerning your setup, my email is on my contacts page.